WearTuf 450 Abrasion Resistant Steel Plate
Characteristics
WearTuf 450 is a fully martensitic Q&T abrasion resistant steel having a hardness of average 450 Brinell. WearTuf 450 combines wear resistant properties with excellent weldability and cold forming capability. Due to the high impact toughness, WearTuf 450 offers very good crack integrity.
Dimensions
WearTuf 450 is supplied in the thickness rage of 3.0 - 60.0 mm and in the plate width of 900 – 3 100 mm. Supplied plate length from 4 000 to 18 000 mm.
Impact toughness
Typical 45J/-40°C (-40°F)
The impact toughness is given as absorbed energy at temperature, being the average of three full size Charpy-V test samples in longitudinal direction to rolling, according to EN ISO 148-1.
Hardness guarantee
Surface hardness: 425-475 Brinell
Guaranteed hardness range, measured on a milled surface at a depth of 0.5 – 2.0 mm below the plate surface, according to ISO EN 6506-1.
Min center hardness:
Plate thickness ≤ 20mm: min 425 Brinell
Plate thickness ＞ 20mm: 95% of min guaranteed surface hardness.
Applications
WearTuf 450 fits a vast number of different applications within earth moving, mining and transport equipment. WearTuf 450 is specially designed for applications focusing on light weight design concepts, such as on and off road dumper and tipper bodies, open top containers, concrete mixer and garbage trucks.
Ultrasonic testing
All plates delivered meets the Class E1, S1 requirement, according to EN 10 160.
Delivery condition
WearTuf 450 is delivered in the as quenched (Q) condition, and when found necessary in the condition of quenched and tempered (QT).
The plates are delivered with sheared or thermally cut edges.
Tolerances
The thickness tolerances of WearTuf 450 meets and exceeds the thickness tolerance of EN 10 029
Class A . Tolerances on shape, length, and width meets the requirements of EN 10029. Flatness tolerances conforms to EN 10 029 Class S or closer.
Surface condition and properties
The delivered surface finish meets and exceeds that of EN 10163-2 Class A, Subclass 3.
The plates will be delivered as painted, using a low zinc silicate corrosion protective shop primer. Plates can also be delivered as unpainted.
Heat Treatment
Since the properties in the as delivery condition cannot be retained after exposure at service temperatures above 250°C, WearTuf 450 is not intended for further heat treatment.
Technical Data
Chemical Composition Ladle analysis: The steel is grain refined and fully killed, wt%
Thickness
(mm) | C
max | Si
max | Mn
max | P
max | S
max | Cr
max | Ni
max | Mo
max | B
max | CEV
Typical | CET
Typical |
| 4.0 – 12.0 | 0.20 | 0.60 | 1.50 | 0.025 | 0.010 | 0.40 | 0.10 | 0.20 | 0.004 | 0.42 | 0.31 |
| 12.1 – 25.0 | 0.22 | 0.60 | 1.50 | 0.025 | 0.010 | 0.60 | 0.20 | 0.25 | 0.004 | 0.50 | 0.35 |
| 25.1 – 35.0 | 0.22 | 0.70 | 1.60 | 0.025 | 0.010 | 1.00 | 0.25 | 0.30 | 0.004 | 0.59 | 0.38 |
| 35.1 – 50.0 | 0.23 | 0.70 | 1.60 | 0.025 | 0.010 | 1.20 | 0.70 | 0.50 | 0.004 | 0.69 | 0.40 |
CEV = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15
CET = C + (Mn + Mo)/10 + (Cr + Cu)/20 + Ni/40
Mechanical Properties Yield strength
Rp0.2 | Tensile strength
Rm | Elongation
A5 |
| 1100 MPa | 1400 MPa | 10% |
Pictures of 20mm NM400 Wear Resistant Steel Plate
Quality first
Our Certificates
About Us
FAQ
Q1. Where is your factory?
A1: Our company’s processing center is located in Zhengzhou, Henan, China.
Which is well equipped with laser cutting machines, mirror polishing machines, and related machines.
We can provide a wide range of personalized services according to the customers’ needs.
Q2. What are your company's main products?
A2: Our main products are 1mm thick stainless steel shim plate/sheet, coil, round/square pipe, bar, channel, etc.
Q3. How do you control quality?
A3: Mill Test Certification is supplied with shipment, Third Party Inspection is available.
Q4. What are the advantages of your company?
A4: We have many professionals, technical personnel, more competitive prices, and the best after-sales service than other stainless steel companies.
Q5. How many countries have you already exported to?
A5: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Turkey, Jordan, India, etc.
Q6. Can you provide a sample?
A6: Small samples in store and can provide the samples for free. Customized samples will take about 5-7days.
